Related Link:
|
|
|
Related Link: |
|
|
CPU Bus Speed Settings |
|
|
|
|
CPU Clock Multiplier |
|
|
|
|
CPU Core Voltage Settings - For S1590 boards Rev 4.0 and earlier |
|
|
|
*Note: Revision 4.0 or earlier boards have only 8 pins for Jumper JPW1. Boards that are Revision 5.0 and above have 10 pins for Jumper JPW1. Go here to see correction. |
|
|
CPU Core Voltage Settings - For S1590 boards Rev 5.0 and above |
|
|
|
|
SIMM Voltage Settings |
|
|
|
|
Memory (DIMM) Clock Speed |
|
|
|
|
Hardware CMOS / Password Reset |
|
|
|
|
Power Supply Type |
|
|
|
|
Split Voltage Setting (JP11) |
|
|
|
|
NOTE: JP11 is a split-voltage setting. Setting the jumper OFF (open) allows for separate core and I/O voltages. New P55C type CPUs such as AMD K6/K6-2 require the setting to be OFF. Setting the jumper ON (closed) gives the CPU only a single voltage control typically for older P54C type CPUs. |
|
© Copyright 2001, Tyan Computer Corporation. All Rights Reserved. |