Configuring System Board

Switch Settings

The following illustration shows the location of Switch 1. Switch 1 controls the CPU/clock speed as well as the Power-on Password.

S1 on switch 1 enables the Power-on Password. The default is OFF. To reset the password, turn this switch ON.

SW1 Settings
	S1	S2	S3	S4	S5	S6
400/100 MHz	OFF	OFF	ON	ON	OFF	OFF
450/100 MHz	OFF	OFF	ON	OFF	OFF	OFF
NOTE: S1 OFF = Password enabled (default)

Top of Page

System Board Configuration Jumper J5 Settings
Setting	Function	Description
1-4	Battery	External battery connection
5-6	Battery	External battery jumper
6-7	Battery	Internal battery jumper (default)

Top of Page