Installation Overview

Do not install Intel^® Packet Protect until you have set up your Intel^® adapters and configured the EtherExpress PROSet II utility to enable IPSec.

To install and set up Intel Packet Protect

1. Check to make sure your system is ready to install Intel Packet Protect. Click for more information.

2. Install and set up your Intel adapter and configure the EtherExpress PROSet II utility to enable support for IPSec. Click for more information

3. Install Intel Packet Protect from the Intel CD. Click for more information

Copyright © 2000, Intel Corporation. All rights reserved.

Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein.

* Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe.