old Old BIOS Files. kt7ul.exe
  1. Released date: 09/05/2000
  2. Supports core voltage to 1.85v.
  3. Adds 3 options in BIOS : Enhance Chip Performance, Force4-way Interleave , Enable Dram 4K-Page Mode.
  4. Fixes Duron CPU(1.6v) issue.
kt7tl.exe
  1. Released date: 08/04/2000
  2. First release.
kt7wt.exe
  1. Release date:12/12/2000
  2. In addition to support AMICA 29002 2M Flash ROM.
  3. BIOS compile date:12/12/2000
  4. RAID BIOS version v1.0.0622 (RAID function is for KT7-RAID only)
kt7ww.exe
  1. Adds CPU protecting function. !WARNING! If the CPU fan reading of fan header #1 lower than 2000 rpm, or the fan is connected on header #2/#3/#4 or directly to power supply unit, this BIOS will automatically SHUTDOWN THE POWER IN 10 SECONDS. This design protect the processor from damage by heat.
  2. Fixes the fail to boot issue after Load Default then save setting and exit BIOS.
  3. Fixes the Fast Write function failed when the Enhance Chip Performance function enabled.
  4. Fixes the delay issue for certain DVD-ROM during booting up.
  5. Fixes the misreading issue for certain VCM 256M memory module.
  6. BIOS compile date 12/15/2000
  7. RAID BIOS version v1.0.3b1 (RAID function is for KT7-RAID and KT7A-RAID only)
!WARNING!
If you are not sure the current CPU fan is correctly on fan header #1, DON'T UPDATE TO WW PLEASE! The header #1 is closer to memory sockets while header #2 is closer to CPU socket. Wrongfully update to WW may cause system never boot up again unless you connect a suitable CPU fan on header #1. kt7wz.exe
  1. Adds an option to enable/disable CPU protection (fan1 error checking) function and changes the default setting to be disabled.
  2. Fixes wrongful register setting of Bank x/y Dram Timing for some special configurations.
  3. Changes CPU FSB from 133MHz to 133.33MHz for specific Athlon processors.
  4. Fixes system-hang issue when running Sisoft Sandra 2000 Professtional.
  5. Supports FlashMenu utility.
  6. HPT 370 RAID BIOS verson 1.0.3b1.
  7. BIOS compile date: 1/29/2001
kt7yh.exe
  1. Enhance Flash Menu supporting.
  2. HPT 370 RAID BIOS version1.0.3B1.
  3. BIOS compile date: 2/14/2001
kt7zt.exe
  1. Adds three new options to enhance the system compatibility

    Set above options to Disabled / Disabled / 0 may help SB Live 5.1 sound
    issue. If the system experiences low performance after these settings,
    enable the PCI master read cachingplease.

  2. Fixes the issue Athlon 1.3G(100) wrongfully recognized as 104x12.5.
  3. Adds an option State after power failure.
  4. Set all four IDE devices to AUTO.
  5. Set the default year to 2001.
  6. BIOS compile date: 05/11/2001
kt73c.exe
  1. HPT 370 RAID BIOS version 1.11.0402
  2. BIOS compile date: 05/11/2001

Since bios 3C includes HPT bios 1.11, you may need upgrade your HPT370 driver before flashing the bios.

When you upgrade bios from ZT to 3C, we highly recommend you backup your system to an independent storage device first. New HPT 1.11 bios could not keep configuration from old one. That means you may need to rebuild RAID system. Therefore, you may lost RAID-0 data after update bios from old version to new one.

For RAID-1 user, please press "CTRL+H" to enter hpt370 setup screen and do "Duplicate Mirror Disk " to recover RAID system.
kt73r.exe

  1. Update BIOS code.
  2. Enhance ISA PnP compatibility.
  3. Enhance SCSI adapters compatibility.
  4. Add 1400(133) Athlon support for KT7A/KT7A-RAID.
  5. Add new option "1200 above" for high speed Athlons with 100FSB. KT7 / KT7-RAID / KT7A / KT7A-RAID / KT7E only support 1.4G(100) Athlon with L1 bridges disconnected. Check L1 before you buy a CPU please!
  6. For Creative SBLive 5.1 sound card users, you may try these options while experience sound quality issue.

    7. Setting above options to Disabled/3 will lead to the same result with VIA Latency patch V0.14 and may help SB Live 5.1 sound issue. If the system experiences low performance after these settings, enable the "PCI master read caching" please.

  7. Enhance the high speed 133FSB Athlon stability for KT7A/KT7A-RAID.
  8. HPT 370 RAID BIOS version 1.11.0402 for KT7-RAID/KT7A-RAID. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
  9. BIOS compile date: 07/05/2001

!!! Attention for upgrading KT7-RAID / KT7A-RAID BIOS to 3R !!!

When you upgrade bios from ZT to 3R, we highly recommend you backup your system and data to an independent storage device first. New HPT 1.11.0402 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone!

For RAID-1 user, please press "CTRL+H" to enter hpt370 setup