behnp.exe
  1. Released Date: 10/15/1999
  2. First release.
behny.exe
  1. Released Date: 10/23/1999
  2. Solves the boot failure issue when switching the CPU to another one.
  3. Solves the auto detection function while putting a CDROM on IDE 1 master.
behnz.exe
  1. Released Date: 11/17/1999
  2. Supports PIII 600Mhz(100Mhz FSB), 650Mhz(100Mhz FSB) and 700Mhz(100Mhz FSB) CPUs.
  3. Updates HPT 366's BIOS to rev. 1.21.
  4. Shows the correct frequency as set by User Define.
behpo.exe
  1. Released Date: 12/30/1999
  2. Supports I2C debug card.
  3. Adds an AGP transfer mode for choosing AGP transfer mode.
behqj.exe
  1. Released Date: 02/01/2000
  2. For users who try to overclock the FSB up to 133 Mhz, but fail when using some AGP video cards which can't run at that frequency in 2X mode.
  3. Supports PIII CPUs up to 800MHz.
  4. Increases SDRAM compatibility.
behrv.exe
  1. Released Date: 05/08/2000
  2. Improves the 133 Mhz option in SoftMenu.
  3. Fixes the hard disk detection failure issue when putting the CD ROM drive on IDE 1, and sets the boot sequence as CDROM first.
  4. Fixes the incorrect memory capacity issue under Linux.
  5. Fixes the HighPoint display problem with AHA-2940A and TNT AGP cards.
  6. Fixes the Wake on Ring, Wake on Lan, and Wake on Alarm problems under Win98SE
  7. Increases the CPU Warning Temperture funtion to solve Win98SE ShoutDown Problems when OEM CPU temperture is detected as too high.
behsh.exe
  1. Released Date: 07/03/2000
  2. Supports Celeron 566(66),600(66),667(66),700(66)and PIII850(100),866(133) and 933(133) MHz CPUs..
behuh.exe
  1. Released Date: 09/05/2000
  2. Supports to PIII 1GHz CPU(133MHz FSB).
behvn.exe
  1. Add PCI/Latency timer function in PnP/PCI Configurations
  2. Support Flash Menu.
  3. HPT 366 BIOS verson 125.
  4. BIOS compile date: 1/04/2001
behxu.exe
  1. Support Celeron 800MHz(100) CPU.
  2. Support Flash Menu.
  3. HPT 366 BIOS verson 1.25.
  4. BIOS compile date: 02/08/2001